AirCycler-AC-G2K-08

AirCycler g2k-08 Hybrid/Balanced Whole House Ventilation System. Includes g2 Controller/Furnace Fan Timer, FanConnect Toggle Switch and 8 Inch Motorized Damper

Catalog #: ACY-AC-G2K-08

AirCycler g2-k System is the industry's most efficient and economical solution for meeting all whole house mechanical ventilation standards. By maximizing the efficiency of central furnace fan integration - using a home's regular heating and cooling cycles to provide supply ventilation - and exhaust fan ventilation, the AirCycler g2-k system delivers fresh air throughout the home with precise control and energy savings.


Features & Benefits
Balanced or hybrid whole house supply-exhaust ventilation solution Lowest HERS score for whole house ventilation Helps meet ASHRAE 62.2 ventilation standard AirCycler g2 is direct replacement for AirCycler FRV Patented algorithm offers precise ventilation control No on going maintenance required Features programmable hours of operation Controls most 110 VAC exhaust fans (when used with FanConnect)

Product Details

The AirCycler g2-k Whole House Mechanical Ventilation System includes the AirCycler g2 Furnace Fan Timer, Fan Connect Bath/Fan Light Switch with remote fan control, and a 8" motorized fresh air damper. This system provides balanced and hybrid whole house supply-exhaust ventilation.

By running the ventilation system at the same time as the home's regular heating and cooling cycles, the Air Cycler g2-k System saves on additional utility costs.

Should regular heating and cooling cycles not run long enough to meet the desired or required ventilation, the AirCycler g2 can turn on smaller and more economical bathroom exhaust fan (or other exhaust fan) through the optional FanConnect Switch. With no need to run the large central fan to provide additional ventilation, homeowner complaints of cold air or noisy operation are eliminated and efficiency is drastically improved. Balanced ventilation can be achieved by energizing the exhaust fan anytime the motorized damper is opened.

Support Videos
How the g2 AirCycler works	AirCycler g2 AirCycler Demo
AirCycler g2 Simulator Demo

Documentation & Links
Sales & Promotion	Installation & Setup
G2K Brochure	Installation & User Guide
Why Ventilate with G2	Installation Testing
G2K System Simulator	Training Guide
Hybrid vs Balanced Setup	Troubleshooting Guide
Competitive Comparisons	Calculated Time Quick Setup
Code Compliance	Calculated Flow Quick Setup
Fan Connect Brochure	Damper Installation Guide
Damper Brochure	Rating Software Procedure
TempGuard Brochure	TempGuard Wiring
Annual Ventilation Cost Calculator

Special Wiring Options
Supply & Exhaust - No AHU	Carrier Communicating Furnace
2 Bath 2 Exhaust Application	Communicating Thermostat
Booster Fan Application

Product ID
Mfg Part#:	AirCycler AC-G2K-08
Series:	AirCycler g2k
Product Group:	Fresh Air Systems
Product Type:	Hybrid/Balanced Supply / Exhaust
Specifications
Whole House System
Approx. Annual Energy System Cost - 2500 Sq. Ft. 4 Bed @ 12 cents Kwh
Older Construction:	Low $25 - High $50
Newer Construction:	Low $85 - High $115
AirCycler g2 Furnace Fan Timer
Control Type:	Furnace Mount
Switch Type:	Controller
Operating Voltage:	24 VAC (Up to 30 VAC max)
Current Draw:	0.07 Amps
Color:	White
Country of Origin:	China
Motorized Fresh Air Damper
Operating Voltage:	24VAC (up to 30VAC max)
Current Draw:	0.07 A idle, 0.125 for 15 sec transit time
Power Draw (VA):	> 1W Idle, 3W for 15 sec transit time
Wiring Requirements:	18 GA minimum
Installation Position:	Any
FanConnect Switch
Light Load Max.:	450 Watts @ 120VAC (Blue Wire)
Fan Load Max.:	150 Watts @ 120VAC (Red Wire)
Operation:	120 VAC plus or minus 10%
Measurements
Unit Weight:	5 lbs
Package Dimensions:	10 x 10 x 15 Inch
Warranty
Warranty Unit:	1-Year
Ratings and Standards
ASHRAE:	62.2 Compliant when used with compliant fan